AKSUKES
Liquit İnsulation Material
Product Details
DESCRIPTION:
Styrene acrylic emulsion based, flexible, liquit plastic covering material; especially developed for water and roof insulation
PROPERTIES:
It is ready to apply and which is easily applied brush or roll. It has semi leveling structure very easily covering on the surfaces. It has air circulating ability. It has remin own structure in spite of diffrent hot or cold weather conditions. Perfect stickness ability and elongation coefficient %500
APPLICATION AREAS:
If you do not want to prefer water or humidty absorbent on the surface of the buildings, concrete, brick, wood, ceramic or roofing material made of asbestos and cement, you can safetly use it.
APPLICATION METHOD:
Application surfaces must be removed dirt, grease, dust peeling substances or old paint. Surface should be prepared clean and dry. First coat must be applied upon diluting with 30% of water as an undercot. The application must be made on two and third vertical coatings without diluting after the undercoatings get dry. Waiting time between the coatings is 24 hours.
DRYING TIME:
(25ºC – 65% current humidity) First drying 12 hours Hard drying 24 hours DRYING TIME: would be change, according to the weather temperature, dry film thickness, surface current humidity and room temperature
SARFİYAT (Tek Katta)
Yüzeye bağlı olarak yatay uygulamalarda 1,5kg/m², düşey uygulamada 1kg/m².
CONSUMPTION (1 layer):
According to surface horizontal application 1,5 kg/m², vertical application 1kg/m²
STORAGE LIFE:
Keep it away from direct sunshine and in a cool area between +5ºC and +30ºC. The life-time of the product is one year after the date of production if stored in the recommended storage conditions and in unopened original packing.
SECURITY INSTRUCTIONS:
S2- Keep out of reach of children.
S7- Keep tightly closed at a cool and well ventilated place.
S24/25- Harmful in touch with eyes and skin.
