AXUAHŞAP
Decoratıve, Wood Protectıve
Project Details
DESCRIPTION
Alkyd resin based, decorative, matt, and transparent wood protective
PROPERTIES:
Axuwood has a specific internal structure which will penetrate deeply without changing the natural appearance of the wood. It does not a constitute a barrier so that the wooden surface can breath easily. Axuwood protects your wood against: bad effects of sunshine, mould growth, fungi and worms.
APPLICATION AREAS:
It is used on all type of wooden surfaces as decorative and protective purposes
APPLICATION METHOD:
Dirt, grease, old loose fibres or flaking materials must be removed. The humidity of the wooden surface should not be more than 12%. Apply one layer of Axuwood with a brush, roll or spray gun without any thinner and leave it for drying for 6 hours. Apply the 2d layer afterwards.
DRYING TIME:
(20ºC – %65 current humidity) depending on the wood absorbance Touching drying 1-2 hours Dust drying 3-4 hours Hard drying 5-7 hours
CONSUMPTION(1 layer)
(1 layer) 1lt 8-12/m² or (84-121ml/m²)
STORAGE LIFE:
Keep it away from direct sunshine and in a cool area between +5ºC and +30ºC. The life-time of the product is one year at room temperature if stored in the recommended storage conditions and in unopened original packing
FLASH POINT:
37ºC (Between 21ºC – 50ºC, contains unmixable with water, flammable steam liquids)
DANGER INSTRUCTIONS:
R10- Flammable
R20/21/22- Harmful when swallowed, by inhalation and in contact with the skin
SECURITY INSTRUCTIONS:
S2- Keep out of reach of children.
S3/7/9- Keep tightly closed at a cool and well ventilated place.
S16- Keep away from flammable sources. No Smoking.
S24/25- Harmful in touch with eyes and skin.
S51- Use only in well ventilated areas.
