AXUMACUN
Acrylic Wall Putty For İnternal Wall Facades
Product Details
DESCRIPTION:
Acrylic dispersion modified, hydraulic connectivity, including double componented (2d is cement) structured putty, it is used for repairing internal-external
PROPERTIES:
Cracks on the surfaces can be repaired with 2 layers of putty on a canevas system. The surface resulting from this putty application will be much stronger than other external covering paints. Without any need for a decorative or protective paint, the surface becomes resistant against external effects. You can start applying the last coat paint including an acrylic dispersion based, synthetic oil based or thermoplastic resin based structure. It strenghts perfectly your facade and never becomes pluffy.
APPLICATION AREAS:
You can use it to fill holes, cracks on gross cemented, cemented new or old plastered facades. Axuputty prepares your facades and ceilings before wall paper, plaster or lime application. It is also used to stick heat isolation panels on the wall facades.
APPLICATION METHOD:
If the surface has a high absorbance, you should fill the surface with Axubinder, Axubinder-S or Axuniprimer. You can fill cracks with a special mixture dilluted with water by the help of a trowel apply untill deep points of cracks. You should buy cement (2d comonent) and mix it with a mixer to obtain a homogene structure. Considering the pot life, the quantity to mix should be according your need.
DRYING TIME:
(20ºC – %65 current humidity) Touching time 3-4 hours. Total drying 8-10 hours
CONSUMPTION:
Depending on the structure of the facade
STORAGE LIFE:
Keep it away from direct sunshine and in a cool area between +5ºC and +30ºC. The life-time of the product is one year after the date of production if stored in the recommended storage conditions and in unopened original packing.
SECURITY INSTRUCTIONS:
S2- Keep out of reach of children.
S7- Keep tightly closed at a cool and well ventilated place.
S24/25- Harmful in touch with eyes and skin.
