AKSUTEKS
Textured Exterior Wall Covering
Product Details
DESCRIPTION:
Acrylic copolymer emulsion based, textured, which is applied according to the thickness of the design with roll, matt exterior covering materials.
PROPERTIES:
Acrylic emulsion based, It is extremely resistant to, pollution, sunlight, rain and industrial weather conditions. It has air circulating ability therefore resistant against penetration of water humidity through the wall. It does not crack or spill and perfect stickness ability.
APPLICATION AREAS:
It is used on all kind of wall, concrete, thin plaster or as a decorative aim applied such as wooden surface, brick, concrete etc.
APPLICATION METHOD:
Application surfaces should be repair the facade by using Axuputty Acrylic in order to level the surface. Afterwards Aksubinder is applied. 2-3 hours later, Aksuteks is applied with coral rol lor covered with felt according to thickness of the design. Application should be making upon 5°C temperature. Aksuteks coating material may be adding little water.
DRYING TIME:
(25ºC – 65% current humidity) Touch drying between 3-4 hours Hard drying 24 hours.
CONSUMPTION (1 layer):
According to the thickness of design; Thin pattern 0,700-0,900kg / m² Medium pattern
1,000-1,200kg/m² Thick pattern 1,200-1,500kg/m².
STORAGE LIFE:
Keep it away from direct sunshine and in a cool area between +5ºC and +30ºC. The life-time of the product is one year after the date of production if stored in the recommended storage conditions and in unopened original packing.
SECURITY INSTRUCTIONS:
S2- Keep out of reach of children.
S7- Keep tightly closed at a cool and well ventilated place.
S24/25- Harmful in touch with eyes and skin.
