AXUPAS
Synthetic Protective Primer
Product Details
DESCRIPTION:
Synthetic alkyd resin based, anticorrusive for mettalic surfaces; used as a primer paint.
PROPERTIES:
This primer paint is matt, resistant to salted water and humidity, anticorrusive and combinated with antirust characteristics iron oixide pigments to protect your metallic surfaces.
APPLICATION AREAS:
It is applied Axurust for all internal-external parts of buildings, old or new surfaces of metallic constructions as an anticorrusive primer.
APPLICATION METHOD:
Metallic parts must be dry, clean, and removed from all rust and peeling substances. If possible remove the old paint with sand scraper or a steel wire brush. Then, prime the whole surface using Axurust antirust anticorrusive primer. For this application, dilute the volume by 10% of synthetic thinner for a roller and 15% for a spraygun application. Use 2 coats of Axurust, 6-8 hours between each coat.
DRYING TIME:
(20ºC – %65 current humidity) Touching drying 1/2-2 hours Dust drying 4-5 hours Hard drying 8 hours
CONSUMPTION (1 layer):
12-14m²/1lt that can be primed
STORAGE LIFE:
Keep it away from direct sunshine and in a cool area between +5ºC and +30ºC The life-time of the product is one year at room temperature if stored in the recommended storage conditions and in unopened original packing
FLASH POINT:
45ºC (21ºC – 50ºC, contains unmixable with water, flammable steam liquids)
DANGER INSTRUCTIONS:
R10- Flammable
R20/21/22- Harmful when swallowed, by inhalation and in contact with the skin
SECURITY INSTRUCTIONS:
S2- Keep out of reach of children.
S3/7/9- Keep tightly closed at a cool and well ventilated place.
S16- Keep away from flammable sources. No Smoking.
S24/25- Harmful in touch with eyes and skin.
S51- Use only in well ventilated areas.
