AXURAPİD
Last Coat Paint
Product Details
DESCRIPTION:
Air drying, synthetic alkyd resin based, last workshop coat.
PROPERTIES:
It has a high adherence and covering capacity, is economic and dries easily.
APPLICATION AREAS:
You can use it for all metallic, previously primed A metallic facades and machinery. It is a decorative and protective paint.
APPLICATION METHOD:
Metallic or A metallic facades must be dry, strong and clean. All remaining rust, peeling parts, old paint must be removed with a steel wire brush or a sand scraper. After finishing the preparation it is time for priming: apply Axurapid primer for metallic facades and Axu Washprimer for A metallic facades. Leave the facade for drying for 4-6 hours. The next step is the last coat application: dillute Axurapid lastcoat with Axuthinner rapid by 15% for a roller and by 20% for a spray gun application. 2 coats are necessary to obtain a good result ; respect a period of 30 min between each coat.
DRYING TIME:
(20ºC – 65% current humidity) Touching drying 20-30 min. Dust drying 1-2 hours Hard 4-6 hours
FLASH POINT:
35ºC (Between 21ºC – 50ºC, contains unmixable with water, flammable steam liquids)
CONSUMPTION
(approximately a thickness of 35 mic dry film) 0,100-0,150kg/m² depending on the surface
STORAGE LIFE:
Keep it away from direct sunshine and in a cool area between +5ºC and +30ºC. The life-time of the product is one year after the date of production if stored in the recommended storage conditions and in unopened original packing.
DANGER INSTRUCTIONS:
R10- Flammable.
R20/21/22- Harmful when swallowed, by inhalation and in contact with the skin.
SECURITY INSTRUCTIONS:
S2- Keep out of reach of children.
S3/7/9- Keep tightly closed at a cool and well ventilated place.
S13- Keep away from food & beverage.
S16- Keep away from flammable sources. No Smoking.
S24/25- Harmful in touch with eyes and skin.
S46- Contact your doctor if swallowing.
S51- Use only in well ventilated areas.
